EB 8314 EN
7
Safety instructions and measures
Î
For connection to the equipotential bonding system, observe the requirements specified in
section 6.4 of EN 60079-14 (VDE 0165 Part 1).
Referenced documentation
The following documents apply in addition to these mounting and operating instructions:
−
Mounting and operating instructions for the mounted valve
−
Mounting and operating instructions for mounted valve accessories (positioner, solenoid
valve etc.)
−
u
AB 0100 for tools, tightening torques, and lubricant
1.1 Notes on possible severe personal injury
DANGER
!
Risk of bursting in the actuator.
Actuators are pressurized. Improper opening can lead to actuator components burst-
ing.
Î
Before starting any work on the actuator, depressurize all plant sections concerned
and the actuator.
1.2 Notes on possible personal injury
WARNING
!
Crush hazard arising from moving parts.
The actuator contains moving parts (piston rod), which can injure hands or fingers if
inserted into the actuator.
Î
Do not insert hands or fingers into the yoke while the valve is in operation.
Î
While working on the actuator, disconnect and lock the pneumatic air supply as
well as the control signal.