Samson 2439, Mounting And Operating Instructions

Page: 9 / 40

EB 2185 EN 9
Safety instructions and measures
Damage to health relating to the REACH regulation.
If a SAMSON device contains a substance which is listed as being a substance of very
high concern on the candidate list of the REACH regulation, this circumstance is indi-
cated on the SAMSON delivery note.
Î
Information on safe use of the part affected,
see
u
http://www.samson.de/reach-en.html.
1.3 Notes on possible property damage
NOTICE !
Risk of valve damage due to unsuitable medium properties.
The valve is designed for a process medium with defined properties.
Î
Only use the process medium specified for sizing.
Risk of irreparable regulator damage caused by the regulator components being
taken apart.
The safety temperature limiter is an inseparable hydraulic unit consisting of a safety
thermostat, capillary tube and temperature sensor. If these components are dismantled
(e.g. removal of the capillary tube), the regulator will be irreparably damaged and will
no longer be able to fulfill its monitoring and control task.
Î
Do not dismantle the regulator.
Î
Only perform allowed activities on the regulator.
Î
Contact SAMSON's After-sales Service department before replacing spare parts.
Risk of valve damage due to contamination (e.g. solid particles) in the pipeline.
The plant operator is responsible for cleaning the pipelines in the plant.
Î
Flush the pipelines before start-up.
Î
Observe the maximum permissible pressure for valve and plant.