Samson 2404-2, Mounting And Operating Instructions

Page: 40 / 76

5-2 EB 2540 EN
Installation
Support or suspension
The plant engineering company is responsi-
ble for selecting and implementing a suitable
support or suspension of the installed regula-
tor and the pipeline.
Depending on the regulator version and
mounting position, the valve, actuator and
pipeline must be supported or suspended.
Note
Do not attach supports directly to the valve,
actuator or control line.
NOTICE !
4.3 4.4 4
3 1 2 4.1 4.2
Tank
1 Shut-off valve
2 Strainer
3 Pressure gauge (storage tank)
4 Type 2404-2 Excess Pressure Valve
4.1 Input pressure regulator
4.2
Pilot valve
4.3 Main valve with actuator (when mounted)
4.4 Needle valve (lead-sealed setting)
Fig. 5-2: Type 2404-2 (installation example)