EB 2183 EN
19
Measures for preparation
4 Measures for preparation
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Compare
the shipment received with the delivery
note.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
4.1 Unpacking
Do not remove the packaging until immedi-
ately before mounting it onto the valve.
Proceed as follows to lift and install the de-
vice:
1. Remove the packaging from the device.
2. Dispose of the packaging in accordance
with the valid regulations.
Note
4.2 Transporting and lifting
Due to the low service weight, lifting equip-
ment is not required to lift and transport the
safety temperature monitor (e.g. to mount it
onto the valve).
Transport instructions
−
Protect the device against external influ-
ences (e.g. impact).
−
Do not damage the corrosion protection
(paint, surface coatings). Repair any
damage immediately.
−
Protect the device against moisture and
dirt.
−
Observe the permissible ambient tem-
peratures (see section 3.1).
4.3 Storage
Risk of safety temperature monitor damage
due to improper storage.
−
Observe the storage instructions.
−
Avoid long storage times.
−
Contact SAMSON in case of different stor-
age conditions or longer storage times.
We recommend to regularly check the device
and the prevailing storage conditions during
long storage periods.
NOTICE
!
Note