MFB
On/Off
Slave speaker
Master speaker
The speaker ID is now stored in the Bluetooth device’s memory.
For details about device discovery please refer to user guide of your bluetooth product to be paired.
Note :
When the speakers are not paired with a device for
3 minutes the paring mode is automatically turned off.
Please turn the speaker off and re-attempt paring
procedure from turning the speaker on (Step 1).
Re-pairing :
1.
2.
Press and hold MFB for more than 5 seconds until you hear the tones and
blue and red lights flash. You will hear tones twice at this time. (1st tone: when
the speakers turn on, 2nd tone : when the speakers are in pairing mode)
If the first step for repairing is successful please follow step 2 - 6 in pairing
procedure.
Pairing with Bluetooth Device :
Press and hold the MFB for more than 5
seconds until you hear the tone twice and
blue and red lights are flashing, then
release.
1.
Set your own Bluetooth device to discover
the SBS-6600 speaker by following
instruction guide of your bluetooth device.
2.
Select “LANCE-6600” in the list of
discovered devices and confirm.
3.
When requested by the bluetooth device,
enter the passkey “0000” and confirm.
4.
Select the music you want to listen to on
your Bluetooth device and enjoy the music.
7.
When the speakers are connected to a
paired device and are ready for use, the
blue indicator light flashes slowly(every
4 seconds) on the master speaker.
5.
Press On/Off button to turn on slave
speaker for about 2 second. The slave
speaker will be automatically paired and
connected to a master speaker.
6.
PAIRING
5