
4
© 2024 Samsara Inc.
5
Run the cable across the top of the windshield.
Secure using cable clips or tuck the cable under
the glass seal around the windshield.
6
Plug the camera into the Vehicle Gateway’s USB
port. For best results, do not wrap the cable
around the Vehicle Gateway or route across the
diagnostics cable.
7
Turn the vehicle on. Confirm installation in either the Samsara Dashboard or the Fleet App:
Dashboard: On the vehicle page, go to Settings under the ... menu and click Take Picture
.
Fleet App: Go to Install Devices under the ... menu, click Install new device, and follow the instructions for
CM33/34.
If all points of interest are not captured (see example frames above), use the provided Allen key to loosen the
cameras before re-adjusting. After all points of interest are captured, use the Allen keys to tighten both mount
locking screws and, if applicable, the inward camera locking screw. Do not overtighten.
Note: You may need to take a short trip for the camera to begin recording. A trip is registered when the Vehicle
Gateway reaches 5 mph (8 km/h).
For additional help, sign in to your Samsara account, click
, and
to submit a ticket.
CM33
CM34
CM34
cloud.samsara.com
LTE
Help
Take photo
Done
Calibrate Camer a
Check Dash Cam Installation
Save
Cancel
Take Picture
Settings
Request Support
Troubleshoot
Take photo
Done