DAC
Converters
elektronik
Sams elektronik d.o.o. • [email protected] • www.sams.rs
18
2. HORIZONTAL / VERTICAL BLANKING
Sel.Menu
HV Blank
MENU / BACK
OK / SAVE
DOWN
UP
1. OUTPUT
Sel.Menu
Output
MENU / BACK
OK / SAVE
DOWN
UP
Sel.Menu
Hor.Pos
MENU / BACK
OK / SAVE
DOWN
UP
3. HORIZONTAL POSITION
This menu is used to select the outgoing signal.
Options are: CVBS & YC, YUV, BetaCam and RGB.
The factory setting is CVBS.
Select an option by pressing the UP / DOWN keys.
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - Output
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - HV Blank
This menu is used for pass / remove information that is contained in the horizontal and vertical
blanking.
Choose one of options:
- PASS ALL - allow all the information contained in the horizontal (embedded audio) and vertical blanking
(from 6 to 22 lines);
- KILL ALL - remove all information contained in the horizontal and vertical blanking.
The factory setting is PASS ALL.
Select an option by pressing the UP / DOWN keys.
Once you have selected the option, press the “MENU / BACK” button. Option is temporarily saved.
Menu - Horizontal position
This menu is used to adjust the horizontal phase of the output video signal.
Horizontal phase shifts in the intervals 37ns (half of one pixel) up to a maximum of one video line
(63.963μs).
During the change in value, it may cause short-term image disturbance in monitor due to the transition
to a new time.
The factory setting is 0.000μs.
Select an option by pressing the UP / DOWN keys.
