12
EVENT LIST
HDD1: MASTER
START TIME: 2005/MAY/16 12:07:00
END TIME: 2005/MAY/16 12:07:30
>01 RECORD 2005/MAY/16 12:07:00
02 MOT CH1 2005/MAY/16 12:06:00
03 MOT CH2 2005/MAY/16 12:05:00
04 POWER 2005/MAY/16 12:04:00
05 ALM CH1 2005/MAY/16 12:03:00
06 ALM CH2 2005/MAY/16 12:02:00
07 ALM CH3 2005/MAY/16 12:01:00
SCHEDULE SETUP
0 3 6 9 12 15 18 21 24
0 3 6 9 12 15 18 21 24
[RIGHT,LEFT] TO MOVE [MENU TO EXIT]
[UP,DOWN] TO SELECT
6. SCHEDULE RECORD
Press
▲
or
▼
key on "SCHEDULE RECORD" &
◄
or
►
to enter:
Use the
◄
or
►
button to select items.
Press the
▲
or
▼
button to confirm the
selection.
Press MENU to go back to SETUP MENU.
There are 24 circles in the schedule table, which represent 24 hours.
Every circle has 3 options to select:
O : represents "fully record"
X : represents "no record"
A : represents "alarm record"
Use the
◄
or
►
button to select hours.
Press
▲
or
▼
button to select the
O / X / A
(Fully / No / Alarm Record).
QUICK KEY:
Play Key to switch between O / X / A (Fully / No / Alarm Record) in all hours.
7. EVENT LIST
Press
▲
or
▼
key on "EVENT LIST" &
◄
or
►
to enter:
Use the
◄
or
►
button to select items.
Press the
▲
or
▼
button to confirm the
selection.
Press MENU back to SETUP MENU.
Use "
▲
or
▼
" key to select event which needs to be played
，
location of " > " symbol
will move up and down for indicating current event which been selected.
Press "
◄
or
►
" key to select events storage from master hard drive or slave hard drive.
When once selection has been made and than press
►
PLAY key to start playback.
There are totally 4 different type's event will be recorded:
1.
RECORD
：
Event starts recording by press "REC" key.
2.
POWER
：
When power off or loss, system would add this issue, and "POWER
ERROR DETECTED" would show on screen while boot.
3.
ALM CH1
：
When external alarm was triggered, event up with alarm number.
4.
MOT CH1
：
When motion detection was triggered, event up with alarm number.
