CONNECTIONS
Before the power supply is connected to this unit, it is to be ensured that the
output voltage of the power supply is adjusted to the required voltage as ex-
plained under “
Principle of Operation
” on page 3.
Switch off the power supply. Connect the positive and negative output of the
power supply to the input terminals of the unit marked “INPUT POSITIVE” and
“INPUT NEGATIVE” respectively
Connect the DC load to the terminals marked “LOAD POSITIVE” and “LOAD
NEGATIVE”
Connect the battery to the terminals marked “BATTERY POSITIVE” and
“BATTERY NEGATIVE”
CAUTION ! ENSURE CORRECT POLARITY OF ALL CONNECTIONS
Page 8
