Sample Fuel POLY CRE8, Manual

Page: 6 / 22

PLUGI-IIN CONTROLS
6
Ö The small triangles for indicating the horizontal and the vertical axis are only available if
parameters are assigned to Sphere H and V.
Center Horizontal/Center Vertical
You can set up the sphere to stay where you move it to or return to the center
automatically. This can be defined for each axis separately.
To do so, right click the Sphere and activate or deactivate the “Center Horizontal” or
“Center Vertical” options on the context menu for the sphere.
Trigger Pads
You can use the trigger pads on the left to remotely trigger single notes or whole chords.
Many of the presets make use of the trigger pads.
•
Pads with a colored frame have single notes or whole chords assigned.
•
The line above a pad lights up when the pad switches between FlexPhraser
variations.
•
To trigger a pad with your mouse, simply click the corresponding pad.
In POLY CRE8, these 8 Trigger pads are assigned to the Arpeggiater's 8 possible
patterns. These can be triggered "on the fly" all without losing sync in real time. This
allows you to perform pattern switches in real time creating almost endless pattern
possibilities from the 8 available "live" patterns. Once you play around with this feature it
becomes a very powerful creative tool.
The pads can also be assigned to the 8 patterns on the Midi Player page as well. Patterns
are set via drag and drop from the number 1-8 buttons on the Arp or Midi Player
page. All patches that utilize the Arp or Midi Player are pre-configured to trigger from
these pads by default.
In the upper left corner of the trigger pad window is a pull-down that contains 2
presets. One configures the pads to trigger via the bottom 8 keys of an 88-key
controller. The second will trigger notes below the keyboard range (C#-2 thru G#-2). The
pre-configured Touchosc and Liine Lemur templates included will trigger these notes from
the Tablet preset.