Samon ONION LOADER, Manual & Parts List

Page: 12 / 38

H10
www.samon.nl - info@samon.nl
V1-2016-NL
7.2 Transport on transportation vehicle.

Check the height and width of the SAMON Onion Loader and mark any projecting parts, where
applicable.

Make sure that the machine is fastened securely with strong rope or tensioning belts before the
transport.

Block the wheels with wheel blocks.
7.2 Transport behind a tractor

Observe the prevailing traffic regulations when you transport the SAMON Onion Loader behind a
tractor on the public roads.

When you are steering the tractor bear in mind that the tail of the SAMON Onion Loader swings out in
bends.

The driver's view is obstructed when the tractor is towing the SAMON Onion Loader.
7.4 Storage.

Clean the machine thoroughly.
NOTE!!!
When using a high pressure spray make sure that you do not direct the spray on or in bearings and any
electronics, where relevant.

Check the tire pressure and inspect the tires for damage (2,5 bar).

Check all wearing parts and replace any worn parts in good time.

Check all bearings and replace when the play is excessive.

Inspect the sieve, hedgehog and conveyor belts for damage and breakage.

Inspect all guide and vibratory rollers.

Inspect the feed roller for damage and breakage.

Inspect the complete hydraulic system for damage and leaks.

Lubricate the entire machine (see the Lubrication Section for more details).

Inspect all protective covers and rubbers.

Inspect the safety cords and locking clips for damage and cracks.

Store the machine when it is dry.