![background image](http://html1.mh-extra.com/html/samoa/larius-vega-5-1/larius-vega-5-1_operating-and-maintenance-manual_3964001006.webp)
VEGA 5:1
Maximum working pressure
40 bars (580 psi)
Pump air pressure
3-8 bars (40-120 psi)
*Feed air inlet
3/8" BSPP (F)
Maximum delivery
10 l/min (2,7 gpm)
Cycles per litre
7
Max no. Of cycles per minute
66
Fluid outlet
3/4" BSPP (F)
Noise pressure level
<80 dB (A)
Weight (short version)
12 Kg
Weight (medium version)
13 Kg
Weight (long version)
14 Kg
www.larius.com
6
VEGA 5:1
ED.
04 - 10/2020 - Cod. 150151
B
c
*N.B. The pump is supplied with a bayonet connection
WorKING PrINcIPlE
TEchNIcal DaTa
Parts of the pump in contact with the material
Pumping group: galvanised carbon steel or stainless steel AISI303
Sealing balls: stainless steel AISI 420B
Gaskets: Teflon, Viton
other parts of the pump
Motor casing and motor piston: aluminium
always observe these instructions carefully
when evaluating the product compatibility and
in case of disposal of some parts of the pump no
more usable, in order to meet the environmental
regulations on recycling process.
The pump VEGA 5:1 is a pneumatic pump for the transfer of
liquids at low pressure. The Vega pump is essentially comprised
of an air motor and a structure known as the “Material Pumping
Unit”, or simply the “Pumping Unit”.
In the pneumatic motor, compressed air causes the vertical
reciprocating movement of the motor piston; this movement is
transmitted through a connecting rod to the material pumping
piston. This allows for the material to be aspirated and pushed
towards the outlet.
The ratio 5:1 means that the outlet pressure of material is 5 times
higher than the pump feed air pressure.