www.larius.com
3
GHIBLI 24:1
ED. 06 - 08/2020 - Cod. 150156
B
C
Always observe these instructions carefully
when evaluating the product compatibility and
in case of disposal of some parts of the pump no
more usable, in order to meet the environmental
regulations on recycling process.
GHIBLI 24:1 DE
Maximum pressure of the product
168 bar
Pump feed air pressure
3-7 bar
*Feed air inlet
1/2" BSPP
Maximum delivery
4 l/min
Cycles per litre
15
Maximum cycles per minute
60
Material outlet
3/4" BSPP
Noise pressure level
< 80 dB(A)
GHIBLI 24:1 DE
is a high pressure pneumatic pump used for
extrusion and transferring of high viscosity products.
The pump is essentially constituted of an air motor and of a
structure called "material pumping group" or simply "pumping
group".
In the pneumatic motor, compressed air causes the vertical
reciprocating movement of the motor piston; this movement is
transmitted through a connecting rod to the material pumping
piston ending with a shovel plate alowing to suck very viscous
products.
The ratio 24:1 means that the outlet pressure of material is 24
times higher than the pump feed air pressure.
Parts of the pump in contact with the material
Pumping group: galvanized carbon steel
Sealing balls: stainless steel AISI 420B
Gaskets: PTFE, Viton
Other parts of the pump
Motor casing and motor piston: aluminium
WORKING PRINCIPLE
TECHNICAL DATA
