Sammode SA
Notice VOUET … SENSOR
24 rue des Amandiers, F-75020 Paris
5/5
Octobre 2016
Setting up the sensor
Setting a threshold
Value range
2
–
50 lx ; smooth adjustment or disable
Position I
Disable
Position V
threshold 2 lx
Setting a detection range
Value range
smooth adjustment; depends on installation height
Position I
maximum detection range
Position V
minimum detection range
Setting a run-on time
Value range
30 s
–
30 min ;
smooth adjustment
Position VII
30 min
Position I
30 s
A threshold can be set to prevent the lighting from switching
on unnecessarily when illuminance levels are sufficient. The
threshold indicates the maximum illuminance at which the
lighting switches on if motion is detected.
he detection range can be restricted to prevent the lighting from switching on unnecessarily because the range is too large.
The detection range indicates the diameter in which motion is detected.
A run-on time can be set to prevent the lighting from switching on and
off unnecessarily. The run-on time starts after the last motion has been
detected. If further motion is registered in the detection range during
the run-on time, this time starts over again.
