SmartVide
X
|
Installation
4
User’s manual — 2901344/0
Safety warnings in the manual
Other warnings in the manual
2
Installation
Fig. 1:
SmartVide X, main components, part 1
Fig. 2:
SmartVide X, main components, part 2
2.1
Supply scope
•
Documentation:
– User manual.
– Warranty card and Declaration of Conformity.
– List of spare parts.
– Electrical circuit diagram.
•
Machine with assembled components. [
•
Special bag for transporting the machine.
2.2
Preparation for installation
Tools and material required for installation
•
Tank with the height dimensions indicated in the appendix at
the end of the manual and a capacity as indicated in
chapter
Space required for installation
•
Use this machine in a ventilated kitchen and at an ambient tem
-
perature of no more than 40
°C.
•
Do not block or obstruct the ventilation slots.
•
Do not place the machine in contact with or near heat sources.
Electrical connections
Before installation, take note of the power input required by the
machine. [
].
2.3
Assembly
1)
Place the tank on a flat, level, rigid and non-combustible sur
-
face, preferably near a sink or drain for emptying.
2)
Attach the machine to the tank as shown in the appendix at the
end of the manual.
⚠
Warning
“Warning” safety warnings could result in severe, irreversible
personal injuries or death.
⚠
Caution
“Caution” safety warnings could result in severe, reversible per
-
sonal injuries.
Notice
“Notice” warnings could result in damage to the machine.
ℹ
Information
The tables of “Information” contain advice on how to use the
machine correctly and efficiently.
1
BT/Wi-Fi antenna
6
Stirrer motor
2
On/Off switch
7
Float, minimum level protection
3
Ventilation area
8
USB connection for power-heated
tank [
4
Water temperature sensor
9
Connection jack for temperature
needle probe
5
Heater element
10
RFID reader
1
2
10
7
4
5
6
9
8
3
1
Knurled grating fastener
3
Minimum level indicator
2
Protective grating
ℹ
Information
Figure with machine dimensions: see appendix at the end of the
manual.
⚠
Warning
Risk of serious accidents if the machine cannot be
disconnected or turned off
– When installing the machine, make sure the operator will be able
to reach the switch and plug without difficulty.
1
3
2
