CONFIDENTIAL
Page 13
2004/8/20
Chapter 3. SETTING UP SmartTablet HARDWARES:
1. Installing the battery pack to SmartTablet.
The rechargeable battery is packed separately from SmartTablet and should be slide in
very carefully to the bottom of SmartTablet. The battery should be fully charged before
using it for the first time.
2. Connecting to the power.
- Connect AC/DC adapter/battery charger to the power port located on the right side of
SmartTablet.
- Connect AC/DC adapter/battery charger to the power receptacle.
- Green LED light will be shown on the AC/DC adapter indicating the battery is being fully
charged.
3. Charging Time.
It will take about 3 hours for the battery to be fully charged.
4.Handle The Battery Pack With Cautions.
- Only use the AC adapter that comes with SmartTablet.
- If the battery is not used for long period of time, totally drain the battery out.
- If the temperature of the battery pack goes higher than 60
°
C, remove the pack and let it
cool down in room temperature before using it again.
- Do not leave the battery pack exposed direct sunlight or heated up.
- Do not disassemble the battery pack.
- Do not drop the battery pack or give physical shock.
- Do not let children play with the battery.
