Samlexpower PST-120-12 Owner'S Manual Download Page 2

2  |  SAMLEX AMERICA INC.    

 

seCtIOn 1  |  

safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

SAVe tHeSe inStRUctionS

This manual contains important Safety and operating Instructions. Please read before 
using this unit .

The following safety symbols will be used in this manual to highlight safety  
and information:

 

  

WARninG!

Indicates possibility of physical harm to the user in case of non-compliance.

 

!

  cAUtion!

Indicates possibility of damage to the equipment in case of non-compliance.

Please read these instructions before installing or operating the unit to prevent personal 
injury or damage to the unit. 

 

   

WARninGS!

1. Do NoT oPeN To reDUCe rISK of fIre or eLeCTrIC SHoCK. THere Are No USer 

SerVICeAbLe PArTS INSIDe—refer To QUALIfIeD SerVICe PerSoNNeL.

2. It is recommended that you return your inverter to a qualified dealer for any service 

or repair. Incorrect assembly may result in electric shock or fire.

3. To reduce the risk of electric shock, unplug the DC input from the battery before  

attempting any maintenance or cleaning. 

4. To reduce risk of damage to electric plug and cord, pull by plug rather than cord when 

disconnecting the unit.

5. An extension cord should not be used unless absolutely necessary. If an extension cord 

is used, make sure that it has 2-prong, male plug (NeMA1-15P) and 2-prong, female 
receptacle (NeMA1-15r). The size of the current carrying conductors should be such 
that they are able to carry at least 2.5A for the length of the extension.

6. Place the unit in an area that will allow air to flow freely around the unit. Do NoT 

block or obstruct vent openings or install the unit in an enclosed compartment.

7. Keep the unit away from moisture and water.

8. NeVer oPerATe TWo or More UNITS IN PArALLeL.

Summary of Contents for PST-120-12










Reviews: