Samlex Solar SRV-100-30A, Owner'S Manual

Page: 6 / 48

6 | SAMLEX AMERICA INC.
SECTION 2 | Description and Components
Details of Charge Controller SCC-30AB
Please refer to the Owner’s Manual enclosed with the Charge Controller.
Details of components included in the Kits are given below:
Table 2.2: List of Components
Serial
No. Description
100W Kit
SRV-100-30A
150W Kit
SRV-150-30A
200W Kit
SRV-200-30A
1 100W Solar Panel 1 0 0
2 150W Solar Panel 0 1 0
3 200W Solar Panel 0 0 1
4 30A, PWM Charge Controller Model SCC-30AB 1 1 1
5 Solar Panel Connecting Wires Kit Model SCW-20-2 consisting of:
5-1
Positive (+) PV Extension Wire:
• 20 ft. length, AWG #12
• Male MC-4 Connector on one end and bare on the other
1 1 1
5-2
Negative (-) PV Extension Wire:
• 20 ft. length, AWG #12
• Female MC-4 Connector on one end and bare on the other
1 1 1
6 5-Hole Mounting Bracket for fixing Panel to RV Roof / other structure 4 4 4
7
Flange Bolt (1/4-20 x 3/4”): Hex, Stainless Steel - For fixing panel
frame to Mounting Bracket (Srl. 5)
4 4 4
8 Flat Washer (1/4”): Stainless Steel - Under Flange Bolts (Srls. 6 and 10) 8 8 8
9
Locknut (1/4”): Hex, Stainless Steel, Nylon Insert - For Flange
Bolt (Srl. 6)
4 4 4
10
Well Nut (Nut size: 1/4-20; Length 1”; Shank Dia 1/2”) - For
fixing Mounting Bracket (Srl. 5) to RV roof / other structure
4 4 4
11
Flange Bolt (1/4-20 x 1¼ ”): Hex, Stainless Steel - For fixing
Mounting Bracket (Srl. 5) to Well Nut (Srl. 9)
4 4 4
12 Cable Clamp - For PV Extension Wires (Srls. 4-1 & 4-2) 6 6 6
13 Self Tapping Screw (#8), Philips - For Cable Clamp (Srl. 11) 6 6 6
14 Cable Tie for PV Extension Wires (Srls. 4-1 & 4-2) 6 6 6
15
Insulated Battery Ring Terminal, Stud Size 5/16”, Wire Size AWG
#10 to #12
2 2 2
16
Insulated Fork Terminals for AWG #10 to #12 wire:
• 2 pcs for crimping to bare ends of PV Extension Wire (Srl 4-1
and 4-2) for connection to Charge Controller (Srl 3)
• 2 pieces for crimping to bare ends of battery wires for connection to
Charge Controller (Srl. 3) (Inside Charge Controller SCC-30AB Box)
4 4 4
17
Tapping Screw (#7x19 x 5/8”): Flat Head, Philips - For mounting of
Charge Controller (Srl. 3) (Inside Charge Controller SCC-30AB box)
4 4 4
18 Owner’s Manual for the Kit 1 1 1
19
Owner’s Manual for Charge Controller SCC-30AB (Inside Charge
Controller box)
1 1 1
20 Insulated Battery Ring Terminal; Stud Size 5/16"; Wire Size #8 AWG 0 0 2
21
Insulated Charge Controller Spade Terminal, Stud Size #8;
Wire Size #8 AWG
0 0 2