Samlex Europe PST-300S-12E, Owner'S Manual

Page: 221 / 256

221
SECCIÓN 6 | Diseño
17
Fig 6.1 (a) PST-300S, Delantera
Fig 6.1 (b) PST-300S, Trasera - Mostrando
compartimento con terminales para cableado
Fig 6.1 (c) PST-300S, Trasera
Fig. 6.1: Diseño de PST-300S
1. Interruptor de tres posiciones
• – ON – Pulse el extremo superior para
encender
• 0 OFF – Centre para desconectar
• = Interruptor EXT – Pulse para activar
las funciones de encendido y apagado
desde un control externo
2. LED verde indica “POTENCIA”
3. LED rojo indica “SOBRECARGA”
4. LED ROJO indica
“SOBRECALENTAMIENTO”
5. Ranuras de entrada de aire para el ventilador
de refrigeración
6. Toma de AC
7. Cable de salida de AC de metal (para cablear)
• Tamaño: Tamaño comercial: ¾”
8. Placa que cubre el compartimento que
contiene los terminales L, N y G para el
cableado de salida de AC
9. Conector modular RJ-50 (10P10C) con la
marca “a distancia” para la conexión opcional
de control remoto por cable modelo RC-300
10. Bloque de terminales con la marca
“Interruptor EXT” con cuatro terminales para
el encendido / apagado mediante señales de
control externo
11. Compartimento que contiene los terminales L,
N y G para cableado de salida de AC
12. Tuerca y tornillo del terminal (tamaño 6x32)
para la zona “G” del cableado de salida de AC
13. Bloque de terminales para la línea “L” y
terminal neutro “N” del cableado de salida de
AC
• Diámetro del orificio terminal: 4,15 mm
• Tamaño del tornillo terminal: M3,5
14. Terminal de entrada de DC negativa negra (-)
15. Cubierta de plástico extraíble para el terminal
de entrada de DC negativa (-)
16. Terminal de entrada de DC positiva roja (+)
17. Cubierta de plástico extraíble para el terminal
de entrada de DC positiva (+)
18. Apertura de salida de aire del ventilador
interno (el ventilador se encuentra detrás de
la apertura)
19. Chasis del terminal de tierra
17
SAMLEX AMERICA INC. | 17
SECTION 6 | Layout
Fig. 6.1: Layout of PST-300S
Fig 6.1 (a) PST-300S, Front
Fig 6.1 (c) PST-300S, Back
Fig 6.1 (b) PST-300S, Front - Showing compartment
with terminals for hardwiring
1. Three Position Rocker Switch
• – ON - Push top end to switch ON locally
• 0 OFF – Centered to switch OFF locally
• = EXT switch - Push button end to
enable switching ON and OFF by
external switching control
2. Green LED marked “POWER”
3. Red LED marked “OVER LOAD”
4. RED LED marked “OVER TEMP”
5. Air inlet slots for cooling fan
6. AC Outlet
7. Metal strain relief clamp for AC output cable
(for hardwiring)
• Size: Trade Size:
¾”
8. Cover plate for compartment containing
L, N and G terminals for hardwiring of AC
output
9. Modular Jack RJ-50 (10P10C) marked
“Remote” for connecting optional wired
Remote Control Model RC-300
10. Terminal Block marked “EXT Switch” with
4 terminals for ON / OFF switching using
external control signals
11. Compartment containing L, N and G
terminals for hardwiring of AC output
12. Nut and bolt terminal (size 6x32) for
Ground “G” for hardwiring of AC output
13. Terminal Block for Line “L” and Neutral
“N” terminals for hardwiring of AC output
• Terminal hole diameter: 4.15 mm
• Terminal set screw size: M3.5
14. Black Negative (-) DC input terminal
15. Black removable plastic cover for Negative
(-) DC input terminal
16. Red Positive (+) DC input terminal
17. Red removable plastic cover for Positive (+)
DC input terminal
18. Opening for air outlet from internal fan (fan
is located behind the opening)
19. Chassis Grounding Terminal
15,17
17
SAMLEX AMERICA INC. | 17
SECTION 6 | Layout
Fig. 6.1: Layout of PST-300S
Fig 6.1 (a) PST-300S, Front
Fig 6.1 (c) PST-300S, Back
Fig 6.1 (b) PST-300S, Front - Showing compartment
with terminals for hardwiring
1. Three Position Rocker Switch
• – ON - Push top end to switch ON locally
• 0 OFF – Centered to switch OFF locally
• = EXT switch - Push button end to
enable switching ON and OFF by
external switching control
2. Green LED marked “POWER”
3. Red LED marked “OVER LOAD”
4. RED LED marked “OVER TEMP”
5. Air inlet slots for cooling fan
6. AC Outlet
7. Metal strain relief clamp for AC output cable
(for hardwiring)
• Size: Trade Size:
¾”
8. Cover plate for compartment containing
L, N and G terminals for hardwiring of AC
output
9. Modular Jack RJ-50 (10P10C) marked
“Remote” for connecting optional wired
Remote Control Model RC-300
10. Terminal Block marked “EXT Switch” with
4 terminals for ON / OFF switching using
external control signals
11. Compartment containing L, N and G
terminals for hardwiring of AC output
12. Nut and bolt terminal (size 6x32) for
Ground “G” for hardwiring of AC output
13. Terminal Block for Line “L” and Neutral
“N” terminals for hardwiring of AC output
• Terminal hole diameter: 4.15 mm
• Terminal set screw size: M3.5
14. Black Negative (-) DC input terminal
15. Black removable plastic cover for Negative
(-) DC input terminal
16. Red Positive (+) DC input terminal
17. Red removable plastic cover for Positive (+)
DC input terminal
18. Opening for air outlet from internal fan (fan
is located behind the opening)
19. Chassis Grounding Terminal
15,17
220 221