User Manual
12
MANUAL SMART ANOXIA EN.DOCX 19/10/2022
The setup process is very simple. You will need a mobile terminal or any other device with WiFi
connection.
Press and hold the setup button while turning on the control unit. You will hear a long beep and the
control unit indicator light will be cyan blue. Release the setup button now. At this point, your control
unit is in configuration mode.
Search your mobile terminal for the WiFi network called “Smart Anoxia Setup”. Connect to this
network. No password needed.
After a few moments your terminal screen will show the configuration interface of your device. On
some mobile terminals, due to their configuration, it is required to manually open the Internet browser
and visit any page to display the configuration interface of your control unit.
Follow the steps to select whether you want to connect to the supplied IoT router or use a custom
WiFi connection. In the latter case, enter the name and password to access your WiFi network. Be
careful to enter credentials correctly, remember that it is case sensitive. Press the "save" button when
you're done. Press the " restart now" button to end the session and exit the configuration mode. Your
control unit restarts in normal mode with green indicator light.
If the settings are correct and your control unit can establish a connection correctly, you will hear an
acoustic signal such as a brief beep. If the connection has failed, the acoustic signal will indicate
connection error with three successive beeps. You will need to check the WiFi signal and that you have