Continue
Part 2 The procedure of WiFi setting
Step 1: Write down the WiFi SSID of inverter.
When the inverter is running, press the function button until the WSN is displaying on the screen.
Record the numbers on the display. The WiFi
SSID of inverter is AP_XXX XXX XXX which is
used later for connecting with PC or smart phone.
Step 2: Configure and set parameter of WiFi module.
(Prepare a laptop with WiFi and make sure the WiFi function is enable. Then follow the steps below to
finish the WiFi connection.)
a) Open the wireless network connection.
b) Refresh the network list and choose
the WiFi SSID: AP_130 420 302.
c) Input the default password
“WIFI 123456” in the popup window.
d) Connect it.
d) Input the website:
http://10. 10. 100. 254 into the address
bar.
e) Enter the user name: admin.
f ) Enter the password: admin, click OK.
02
The server 10. 10. 100. 254 at USER LOGIN requires a
username and password.
Warning: This server is requesting that your username and
password be sent in an insecure manner (basic authentication
without a secure connection).
User name:
Password:
Remember my password
http://10. 10. 100. 254/
Connect to 10. 10. 100. 254
AP_130 420 302
