Once you open the app select the “me” icon which is on the
right bottom of the interface
tap Connection Management
tap again Connect band, and then the APP will search for
Bluetooth device(s), when the available Bluetooth device
displays, please tap B3P or WS-2349 (the BT name of this device)
to make it pair. The pairing will be finished in few seconds.
When you finish select OK/Confirm/Allow for any pop-up
request.
* Now you can start using your desired functions of the smart
band.
Important: To enable all notifications of different software’s
such as WhatsAPP, Facebook, Skype, Twitter, you may need to
turn on the notifications on the APP manually. On the home
page of WEARFIT 2.0, select the “me” icon situated on the right
bottom of the screen,
and select ‘’Device management’’,
‘’ Smart reminder’’,
‘’app notification’’ and turn on all the
APP notifications you want to active.
- For iPhone
1) How to obtain the BT Connection APP? (WEARFIT 2.0)
On iPhone, please go to APP Store and search WEARFIT 2.0 and
install the app.
2) How to make the wearable pair with your iPhone?
*First, turn on the Bluetooth of iPhone
* Run the WEARFIT 2.0 app on the iPhone, on the home page
of WEARFIT 2.0, select “Third party log in”
and select the
social network that appears to log in with this one in the app.
Or you can use an email address to register and to log on.
Once you open the app tap the “MINE” icon which is on the
right bottom of the interface
tap Connection Management
tap again ”Bind Bracelet”, and then the APP will search for
Bluetooth device(s), when the available Bluetooth device
displays, please tap B3P or WS-2349 (the BT name of this device)
