6
Member of Exel group
DRT7145
C - 2022/11
1. Health and safety instructions
1.1. Applicable standards
Inobox
control module has been designed according to standards indicated below:
Canadian
Standards:
• CSA C22.2 No. 61010-1:12
• CSA C22.2 No. 213:19
• CSA C22.2 No. 0:20
• CSA C22.2 No. 60079-31:15 as a guide
• EN 50177:09 / A1:13 as a guide
• EN 50500-2:18 as a guide
US
Standards:
• FANSI/ISA-61010-1: 3rd Ed.
• FM3600: 2018
• FM3611: 2018
• FM 7260: 2018 as a guide
• UL60079-31:2nd Ed. as a guide
In
Canada
, the installation has to be in compliance with the Canadian Electrical Code C22.1 part I, standard safety for
electrical installations.
In the
USA
, the installation has to be in compliance with the National Electrical Code NFPA 70.
1.2. Marking
The
Inobox
control module is designed in accordance with the ATEX 2014/34/EU and SI 2016 No. 1107" Directives,
is category 3 and is intended for use in zone 22.
Refer to the user manual for the Inobox control module.
The X sign behind the EU type examination certificate number indicates that:
• This equipment is intended for an ambient temperature range of 0°C to 40°C.
• During installation, the user should take into account that the keypad of the Inobox control module has only
been subjected to a slight mechanical impact.
• The equipment has to be protected from light.
Warning marking:
“For Electrostatic Finishing Applications using Class II, Div 2, Groups F, G spray material when configured according to
800004734”, this may be abbreviated as “
For Electro. Appl. CL. II, Div 2, Groups F,G When configured acc. to 800004734
“.
