49
DRT7145
C - 2022/11
Member of Exel group
7.1.5.7. Parameter setting screen 5: Time Delays
Press the
key to return to the screen 1 for operating mode selection.
To access the following setting screen, press the
key (Area 5).
To access the previous setting screen (screen 4), press the
key (Area 5).
Area
Description
1
Delay of the electrode blowing after the HV control is stopped in seconds
Press the
and
keys to set the time delay
2
Delay of fluidisation delay after the HV control is stopped in seconds
Press the
and
keys to set the time delay
3
Vibrator delay after the HV control is stopped in seconds
Press the
and
keys to set the time delay
4
Standby time in minutes
Press the
and
keys to set the time delay
If the value is set to 0, the Inobox does not go into standby.
DES08967
3
5
2
s
1 5
s
3 0
s
1 5
m i n
Inobox
INOGUN M
V : XXXX
4
3
2
1
5
