Safety instructions
10
Security devices
Attention
Guards (motor cover, coupling guard, housings, ...)
are set up for safe use of the equipment.
The manufacturer cannot be held responsible for
any bodily injury as well as failures and / or damage
to the equipment resulting from the destruction,
the occultation or the total or partial removal of
the protectors.
Never exceed the maximum working pressures of
the equipment components.
Danger of pressure
Safety requires that a pressure relieve shutoff valve be mounted on the
pump motor supply circuit to allow trapped air to escape when the air
supply is shut off.
Without this precaution, the residual air from the engine may cause the
motor pump to operate and cause a serious accident.
Similarly, a
material bleed valve
must be installed on the material circuit
so that material pressure can be relieved (after shutting off air motor
and decompressing it) before any intervention on the equipment.
These valves should remain closed for air and open for the material
during the procedure.
