SAMES KREMLIN
Page 2
Manual : 573.009.112
2. TECHNICAL
CHARACTERISTICS
The LP regulator enables to regulate a constant
pressure.
Thanks to its large diaphragm, the fluid regulation
is accurate.
This regulator is designed for a full and easy
flushing.
The adjustment is carried out by setting the air
pilot. The fluid pressure (outlet) being similar to
the air pressure (pressure ratio 1) read fluid
pressure on the air gauge.
To get a better adjustment of this fluid regulator,
select an accurate air regulator.
Weight
Fluid inlet
Fluid outlets (two)
Air pilot inlet
Bracket support - Hole Ø
1 000 g / 35 oz
Supplied with M 1/4 BSP+ fitting
according to requirements
F 1/4 BSP
F 1/8 BSP
9 mm / 11/32"
At the fluid inlet, install one of
the fittings supplied with
regulator (fitting M 18 x 125 or
3/8 NPS or 3/8 BSP).
When mounting the fitting
apply some Loctite 222 on
thread.
Maximum fluid pressure
- Inlet
- Outlet
Maximum air pilot pressure.
Fluid flow rate range.
6 bar / 87 PSI
4 bar / 58 PSI
6 bar / 87 PSI
200 to 1500 cc/mn / 12 to 92 cu.in
To get an excellent regulation,
the difference between inlet/
outlet pressure must not
exceed 1.5 bar / 22 PSI.
Metals in contact with the
material.
Stainless steel
Carbide
PTFE
