Index revision : A
22
7159
8. Maintenance
Note: This paragraph applies only to the maintenance of the Inocart cart.
For specific maintenance of the gun
and the Inobox control module
.
WARNING : Disconnect the power supply to the control module before connecting the gun.
Before disconnecting the gun, switch off, cut off the power supply to the control module (othe-
rwise a malfunction may occur).
8.1. Maintenance summary table
The soiling and wear of the different elements of the Inocart carriage caused by the passage
of the powder depends on the nature of the powder and the operating conditions.
Therefore, the periodicity of maintenance indicated in the procedures below is only indicative.
The user will have to create his own maintenance range as he uses the
SAMES KREMLIN
equipment.
Proce-
dure
Detail
Dura-
tion
Frequency
Cleaning
A
Cleaning of the cart
2 mn
8 Hours
B
Powder pump / plunger tube cleaning
2 mn
8 Hours
or at each
color change
Replacement
C
C1
Replacement of filter
30 mn
-
C2
Replacement of vibrator
1 Hour
-
C3
Replacement of elastic pads of the
vibrating table
5 mn
-
C4
Fast Clean replacement
5 mn
-
C5
Replacement of the equipped porous
washer
15 mn
-
