SAMES KREMLIN E Dispense L1K, User Manual

Page: 20 / 60

Using the product
20
7.3 Possible symptoms of faults / Causes of faults / Remedy to be
applied - rapid operation
Valve remedies
Defaults Possible causes Remedies
The material no longer flows
out the valve outlet Clogged valve outlet Check, clean and unclog the valve
outlet if necessary
The inlet valve did not open Check the inlet valve, reassemble it or
replace it if necessary. Refer to the
procedures for the Inlet and Outlet
Valve in the "Repair" section
Check the distributor command, and
the air supply. Change the distributor
if necessary.
Valve open and no material
upstream
Check the material inlet at the valve
inlet
Product continuously flows
out of the valve
Valve closed,
no needle seal / seat holder
Remove and clean the seat needle,
check the condition and replace it if
necessary
Product flows out through
the leak detector
Seal wear and tear Replace the seals