SAMES KREMLIN
- 1 -
N° : 578.057.110-UK-1903
Do not use fluid which would quickly clog the filter or would often block the spray tip.
Air supply should be clean.
The gun is a precision instrument and it relies on good and frequent maintenance for its correct
operation. When it is carried out directly after use, the cleaning of the gun is faster and easier.
Never use metal brushes files, points or clips for dismantling.
Whenever possible, during the course of the day, clean the outside of the spray tip with a soft brush.
Use a tip unclogging needle of the proper size.
SHORT DURATION SHUTDOWN (LESS THAN 3 HOURS)
Remove the paint on the air cap with a brush and solvent. Otherwise, leave the equipment as it is.
Removing the paint will prevent the drying and clogging of the holes.
LONG DURATION SHUTDOWN
Depressurize the fluid systems.
Unscrew the air cap. Remove the spray tip and soak it in solvent.
Use a tip unclogging needle of the proper size.
Flush the installation and leave it full of solvent.
Never soak the gun in solvent.
Always make sure white seal or micro-filter are in place in the spray tip.
