Doc.-ID: 190409-PT08BA-ES-ExCam XF-Q1645_en_rev.01, Page 27 of 32
If, when closing the housing, you see that the surface of the fitting gap is dirty or insuffi-
ciently lubricated, clean it with a clean cloth and de-grease it with a suitable cleaning
agent. Then re-grease it with lubricant suitable for this specific application (e.g., Mo-
lykote® P-40 gel for standard applications or special grease OKS 403 in the event of
heavy seawater influence).
The screwed connections of flange and body components must always be tightened
crosswise
to a torque of
3 Nm
! Do not tighten the screw too strongly! It can cause rupture
of the cylinder head or over-stretching the threads, and thus to impairment of the pres-
sure resistance or ignition protection class
Cylinder-head bolts for explosion-proof connection of the camera
body with the flange component must always be tightened at a 3 Nm
torque - crosswise and evenly!
6.6
Battery
The ExCam XF Q1645 is equipped with a high-temperature resistant Panasonic button
cell BR2330A/VAN. This cell supplies energy to the internal real time clock (RTC). The
customer is not allowed to replace the battery! In this case, please contact the manufac-
turer.
Summary of Contents for ExCam XF Q1645
Page 1: ...ExCam XF Q1645 User Manual...
