Samcon ExCam niteZoom, User Manual

Page: 8 / 24

Doc.-ID: 131106-PT03BA-SS-ExCam niteZoom_en_rev.01, page 8 of 24
3 Safety guidelines
Please observe the safety guidelines indicated in the ATEX installation manual of
the ExCam series!
4 Illustration of the model key
The following model options are currently available for the ExCam
®
niteZoom:
Product name
Model option
ATEX
Type housing
option
(1)
Explosion
group
(2)
Meter
SKA02
(3)
Cable
termin.
(4)
Housing
heating
(5)
ExCam niteZoom T03- VA- B-
005-
K- N
T03- VA- B- 005- K- L
T03- VA- B- 005- P- N
T03- VA- B- 005- P- L
T03- VA- C- 005- K- N
T03- VA- C- 005- K- L
T03- VA- C- 005- P- N
T03- VA- C- 005- P- L
(1)
VA = Execution in stainless steel
(2) B = Explosion group IIB (standard - all gases except hydrogen, acetylene, carbon disulphide)
C = E Explosion group IIC (all gases)
(3)
Length of the connection line in meter (001 - 200)
(5 meter is the standard length)
(4)
K = Terminal block connection (standard)
All signaling lines are spliced to single strands and furnished with wire-end ferrules to allow
connecting the camera to a terminal block
P = Plug- termination
Approximately 30 cm of
the system cable’s outer stealth is stripped.
The power supply strands (RD, BK) are furnished with wire-end ferrules.
The AWG24 cable is furnished with a BNC connector
(5)
N = Normal Temperature (0° C
– 50° C)
L = Low Temperature (-20° C
– 50° C)