Samcon ExCam IPP1275, User Manual, Page: 12 / 28

Doc.-ID: 200917-PT08BA-ES-ExCam IPP1275_en_rev.00.docx, Page 12 of 28
Wiring table:
Potential Colour (IEC 60757) Cross-
section Comment
PA GN/YE 4 mm
2
(rigid) Terminal: Slotted screw M3x0.5 (DIN 84) with
washer Ø9mm (DIN 125A),
Keep 1.2 Nm tightening torque!
Table 5-1 Potential equalization
5.2 Connection work at the device (terminal box) and fuses
Power supply for the camera (PoE)
Voltage supply: PoE, IEEE 802.3af/802.3at type 1 class 2
Reference voltage: +4 V DC
Maximum power consumption: 4.0 W
Typical power consumption: 2.5 W
The figures 5.2 and 5.3 illustrate the potential cable terminations of the ExCam IPP1275.
Possible terminations are sensor unit connected to an ExConnection Rail (T08-
…-TD) or
sensor unit with RJ12 plug and main unit P12 MkII for safe areas (T08-
…-P).
Figure 5-2 ExCam IPP1275 T08-VA0.1.K1.BOR-N.N-xxx.N- P
Figure 5-3 ExCam IPP1275 T08-VA0.1.K1.BOR-N.N-xxx.N- TD
not included