Conference System User Manual
SAMCEN
32
front of “Configure Camera”, select “Protecol-D” in the “Protecol Type” selected box, then click “OK” behind
that selected box, you will hear a “Di” sound after a few seconds. Finally, select “9600” in the “Deme Bpe”
selected box, then click “OK” behind that selected box, you will hear a “Di” sound after a few seconds.
Then set the camera 2, first select camera 2(according to Step2). Second, to set “Camera setting”, select
“Protecol-D” in the “Protecol Type” selected box, then click “OK” behind that selected box, you will hear a
“Di” sound after a few seconds. Finally, select “2400” in the “Deme Bpe” selected box, then click “OK” behind
that selected box, you will hear a “Di” sound after a few seconds.
Finally, set the camera 3, first select camera 2(according to Step2). Second, to set “Camera setting”, select
“Protecol-P” in the “Protecol Type” selected box, then click “OK” behind that selected box, you will hear a “Di”
sound after a few seconds. Finally, select “2400” in the “Deme Bpe” selected box, then click “OK” behind that
selected box, you will hear a “Di” sound after a few seconds.
4)
Preset
①
Select microphone number in “Mic No.” selected box. Then click “Turn on Preset Mic”, you will find the
corresponding microphone turn on.
②
Select Camera which you want to used to track that microphone you select before,
click “OK”
, after you
hear a “Di” sound, you can control that camera.
※
This step is very important; it must be done when you set each preset.
③
Click those big 4 arrow keys big upper-left corner to positioning lenses; click “Focus Near” or “Focus Far”
to adjust distance upper-right corner; click “Zoom +” or “Zoom -” to resized, click “Speed +” or “Speed -”
to adjusting speeds to move.
④
Move the mouse to “Save Preset” and click, then it will run the following dialog box, please click the left
button “
确定
”. After a “Di” sound appears, this preset is applied successfully.