SYSTEM SETUP
SYSTEM SETUP
SYSTEM SETUP
SYSTEM SETUP
CAMERA ID : 1
CAMERA ID : 1
CAMERA ID : 1
CAMERA ID : 1
BAUD RATE : 9600
BAUD RATE : 9600
BAUD RATE : 9600
BAUD RATE : 9600
PROTOCAL : DMAX
PROTOCAL : DMAX
PROTOCAL : DMAX
PROTOCAL : DMAX
485 TERM : LOAD
485 TERM : LOAD
485 TERM : LOAD
485 TERM : LOAD
HEATER MODE : ON
HEATER MODE : ON
HEATER MODE : ON
HEATER MODE : ON
FAN MODE : ON
FAN MODE : ON
FAN MODE : ON
FAN MODE : ON
IR MODE : ON
IR MODE : ON
IR MODE : ON
IR MODE : ON
EXIT
EXIT
EXIT
EXIT
5
5
5
5-
-
-
-2. SYSTEM SETUP
2. SYSTEM SETUP
2. SYSTEM SETUP
2. SYSTEM SETUP
(4) 485 TERM
(4) 485 TERM
(4) 485 TERM
(4) 485 TERM
Default is LOAD
LOAD -> OPEN
(5) HEATER MODE
(5) HEATER MODE
(5) HEATER MODE
(5) HEATER MODE
AUTO : Automatic ON/OFF Mode When Camera Temp less than
<Heater On> Value in Addition Setup
ON : Always Heater on mode
OFF : Always Heater Off mode
(6) FAN MODE
(6) FAN MODE
(6) FAN MODE
(6) FAN MODE
AUTO : Automatic ON/OFF Mode When Camera Temp Is larger
than <FAN On> Value in Addition Setup
ON : Always Fan on mode
OFF : Always Fan Off mode
(1)
(1)
(1)
(1)
CAMERA ID
CAMERA ID
CAMERA ID
CAMERA ID
Camera ID is indicating number assigned each Camera in
case of controlling many Cameras. It is from 1 to 255..
(2) BAUD RATE
(2) BAUD RATE
(2) BAUD RATE
(2) BAUD RATE
Use to communicate through RS485
9600 -> 4800 -> 2400bps
< caution>
When Baud Rate of camera and external system is not
same, it happens Communication fail.
(3) PROTOCAL
(3) PROTOCAL
(3) PROTOCAL
(3) PROTOCAL
Use to communicate through specific Protocol.
STD -> P/D -> H/Y -> DMAX
*. P/D : PELCO-D H/Y : HoneyWell
STD: STANDARD
OFF : Always Fan Off mode
(7) IR MODE
(7) IR MODE
(7) IR MODE
(7) IR MODE
AUTO : Automatic ON/OFF Mode When Lux less than
than <IR ON ILL> Value in Addition Setup
ON : Always IR on mode
OFF : Always IR Off mode