SaMASZ XT 390, Operator'S Manual, Page: 22 / 48

22
XT REAR DISC MOWER OPERATOR'S MANUAL
NOTICE:
If need be, shorten the PTO shaft acc ording to its operator’s manual given by the shaft’s
manufacturer ( Fig. 15 ).
CAUTION:
When changing the tractor, with which the machine operates, control the length
of PTO shaft again, as otherwise the machine can be damaged.
Fig. 15. PTO shaft shortening instructions
CAUTION:
The articulated telescopic shaft should remain connected only during mower
operation. During transport or any servicing operations the shaft should be
disconnected from the PTO of the tractor.
CAUTION:
Use machines with correspondingly designed driving PTO shafts. Prior to the
work commencement, safety guards should be inspected whether they (in the
tractor, the mower and the PTO shaft) are placed correctly and are not damaged.
Damaged or missing parts must be replaced with genuine ones. Make sure that
the -PTO shaft is mounted properly. Approaching the rotating parts is strictly
forbidden, as it may lead to serious injuries or even cause death. For any service
and repair works of the shaft and the mower, the tractor engine and its drive
must be disconnected Prior to the operation commencement, read the
operator's manuals of both the machine and the PTO shaft.
NOTICE:
PTO shaft’s end with friction clutch should be mounted at the mower’s side .