Operating manual
Tedder wagons OptiFEED
7
Removing any part of the machine,
Regulating the machine.
11.
Always block the wheels when working under the machine.
12.
Never turn the machine on until all bystanders are in safe distance.
13.
After any repairs, make sure that the tools were removed from the machine before turning it
on.
14.
Make sure that all covers are properly mounted.
15.
Pay attention to clothing. Wardrobe too loose may be sucked in by machine’s moving parts.
16.
Never make any changes to the covers and turn on the machine when any of the covers are
missing.
17.
When on the road, always adhere to the traffic rules and use appropriate lights.
18.
The maximum speed of the fodder wagon under full load is 20km/h.
19.
Before connecting Power take-off, make sure that the revolution values of machine and
tractor power take-off are reciprocally adequate.
20.
Do not use the machine for purposes other than those specified by the manufacturer.
4.3.
WARNING SYMBOLS
Warning symbols located on the machine, as well as in the manual, contain vital information
regarding safe exploitation of the machine. Warning symbols located on the machineindicate
precautionary measures which we encourage to apply in order to increase fodder wagon longevity
and driver’s safety. It is advised for all the people involved in operating the machine to get to know
safety instructions.
Before operating the machine for the first time, check if all the labels are in place. If they are
not, demand missing ones. The labels have the following meaning:
1.
Read the manual
This sign reminds of the necessity to acquaint
yourself with provided documents. It is necessary; to
make sure that the machine is handled correctly and
also to avoid any possible accidents or damaging the
machine.
2.
Prohibition of repairing devices in motion
Always remember to turn off the engine before
lubrication, regulation, maintenance or repairs. To
make sure that no one starts the engine before the
work is done, remember to take out the keys from
the ignition as well. After making any kind of
repairs, make sure that the tools were not left behind
before turning on the machine again.
3.
Auger in mixing chamber
Make sure that no one enters mixing chamber
while the machine is still working. It is inadmissible
to clean the rotor while the machine is working
.
4.
Warning! Rotor parts
Under no circumstances allow someone to approach
or be in the vicinity of the machine while it is
working. Rotor parts can easily cause severe body
injuries.
