33
OPERATOR’S MANUAL
REAR DISC MOWER
KDT
KDT 180
KDT 220
KDT 260
KDT 300
KDT 340
KDT 341
Fig. 24.
Rotation directions of disks
6.4.
Adjusting the swath width
Swath width is adjusted with swath guides mounted on the 3-point linkage frame of the cutterbar
(
In order to adjust the guide, the following should be performed (for:
KDT 180, KDT 220, KDT 260,
KDT 300, KDT 340
):
❑
loosen locknuts (
2
) and screws (
3
),
❑
shift the guide arm (
6
),
❑
tighten screws (
3
) and locknuts (
2
),
❑
loosen locknuts (
4
) and screws (
5
),
❑
then adjust height and shield angle (
1
),
❑
tighten screws (
5
) and locknuts (
4
).
Disc with the forming drum
Disc without the forming drum
