SaMASZ KDT 220, Operator'S Manual

Page: 32 / 52

32
KDT REAR DISC MOWER OPERATOR’S MANUAL
Fig. 22. Quick replacing of the knives with mounting lever
Fig. 23. Knife mounting torqueing
NOTICE:
Before you change the knife check disc turns ( Fig. 24 ).
WARNING!
Different mounting of the knives will block the mower. When mounting pay
particular attention to loose rotation of the knife on the knife holder pin.
NOTICE:
Due to high discs rpm speed, change knife holders in sets of the same weight.
Improperly changed knife holders will damage disc bearings.
130 Nm