SaMASZ IMPACT 300 H, Operator'S Manual, Page: 12 / 24

12
IMPACT SILAGE ROLLER O PERATOR’S MANUAL
7. Check to ensure that there is a positive connection between the machine and th tractor. Ensure
that the locks on the linkage arms and top-link are engaged.
WARNING:
Failure to have a postive connection can lead to damage and injury.
8. Raise and secure the parking support into the upper storage position (Insert the pin and cotter pin
to secure the support)
WARNING:
When transporting the machine on the 3pt linkage, ensure that the lateral
movement of 3pt linkage is locked.
WARNING:
Operational and raising/lowering of the linkage are to be secured against use
while transporting the machine on the 3pt linkage. Failure to do so can result in
damage, accident, and injury.
9. Connect the hydraulic hoses into the designated control circuit
of the tractor. Information on the control circuit can be found in
the operating instructions of the tractor. Pay careful attention
to cleanliness of the couplings and dust caps. [
Fig. 8 ]
WARNING :
Check the seating of the hydraulic connections.
An incorectly seated hydraulic connection can
break, leak, cause personal injury, and damage
to the environment
.
WARNING:
The hydaulic system is under pressure and can cause serious personal injury,
should the fluid escape. Before coupling or uncoupling the hoses, release the
pressure according to the operating instructions of the tractor.
WARNING:
Leakage of hydraulic fluid can cause serious environmental damage. Take care
to avoid hydraulic fluid leakage.
IMPORTANT:
Hydraulic fluid levels that are too low can cause damage to the tractor’s
hydraulic system and improper operation of the implement. Before use, verify
that the tractor’ s hyraulic fluid level is adaquate for operation. Check the
operating instructions of the tractor to ensure the correct fluid level and fluid
type.
10. Undertake a final check of the hydraulic couplings before starting to work with the tractor and
machine.
11. Attach the electric connection for the road lighting or lights, should your machine be equipped with
them.
12. Check the operation and visbility of the lights and warning pannels.
Fig. 8