Sam4s NR-300 Series, Operator'S Manual

Page: 12 / 176

12
•
Introduction SAM4s NR-300 Series Operator's & Programming Manual v.1.0
Using This Manual
This manual provides you with a means to use your SAM4s cash register to its fullest
potential. It is divided into six sections:

"Getting Started" on page 18, provides quick start steps to help you get up and
running for basic applications.

"Operations" on page 26 guides you through the basic operation sequences.

“
On page 64, explains manager controlled functions, along with reports and
balancing information.

"Service Mode Programming" on page 74 provides instructions for secure
programming
–
usually done by the installing dealer prior to installation.

“
Program Mode Programming
”
on page 94 provides complete programming
instructions, including PLU, function key programs, and system options. This
section is recommended for use by storeowners and managers. Call your SAM4s
dealer if you find you need programming assistance.

“
Sample Reports
”
on page 151 provides a sample of each register report.
The SAM4s NR-300 allows many different user applications. This manual was written with
this in mind. Although we have tried to touch on all available options, your specific
application may differ.If you have questions concerning the configuration of your ER-900,
contact your authorized SAM4s dealer.
Using Flowcharts
Flowcharts are used to supplement step-by-step instructions throughout this manual. For
example, the following flowchart describes how to register $1.00 into the PLU1 key:
This flowchart means:
1. Press numeric key 1.
2. Press numeric key 0.
3. Press numeric key 0.
4. Press PLU #1.
Follow the flowchart from left to right, pressing the keys in the order they are shown.
Numeric keypad entries are shown as square keys. PLU and function keys are shown as
rectangular keys.
1 0 0 PLU #1
1 0 0
PLU
#1