Sirius 800 Series User Manual
5931 Sirius 800 External Multiviewer Output
Multiviewer & Input/Output Monitoring Modules 13.6
Iss 5 Rev 7
Page 240
© 2017 SAM
13.6 5931 Sirius 800 External
Multiviewer Output
The 5931 Sirius 800 external multiviewer output module takes the 48 output signals from the
5902 multiviewer crosspoint module and passes each signal through a re-clocker. Each 5931
external multiviewer output module has 48 outputs.
The external multiviewer output of the 5931 module is connected to one of two possible rear
panels, for details see Table 57. One 5931 module is required for each rear panel fitted.
Figure 168 5931 Sirius 800 External Multiviewer Output Module
Rear Panel
Connectors
Sirius 830/840
:
1369 Rear Panel
Up to 3 rear panels with 48 HD BNC connectors per rear panel
(up to 140 external multiviewer outputs).
Sirius 850
:
1370 Rear Panel
Up to 2 rear panels with 48 HD BNC connectors per rear panel
(up to 96 external multiviewer outputs).
Table 57
5931 External Multiviewer Output Module - Possible Rear Panel Arrangements
Note:
•
Sirius 830
: Output Monitoring is not available on the Sirius 830 when it is equipped
with multiviewer outputs.
•
Sirius 840/850
: If Input pre-processing is monitored using the monitor outputs then
external multiviewer outputs should not be routed from inputs 1, 3, 5 and 7 of any
video input module as they will display duplicates of the four monitoring outputs.
Connectors to
the Motherboard
LEDs
