en
45
5.9.3
Setting the parameters
(timer option)
Depending on the equipment on the appliance, there are different settings possibilities for the control; see
parameter table below in Chapter 5.9.4.
The setting mode will be switched off automatically, if the button “P”
or the buttons “Up”
or “Down”
are pressed. Settings that have been made and not confirmed by pressing the button “P”, have not
been saved.
Changing the setting
The appliance must be
switched on
.
First, hold the button “P”
and then press the button “Temperature/Pump”
−
press both simul-
tane ously and hold for three seconds.
The most recently set parameter will be displayed.
Within 10 seconds, press the “Up”
or “Down”
button until the desired parameter is displayed.
Press the button “P”
within ten seconds.
The parameter value blinks.
Within 10 seconds, press the “Up”
or “Down”
button until the desired value has been set.
Save the set value
−
press the button “P”
within ten seconds.
Exit the adjustment process.
Wait 10 seconds
−
the function “Setting the parameters” is switched off.
or:
First, hold the button “P”
and then press the button “Temperature/Pump”
−
press both simul-
taneously and hold for one second.
5.9.4
Parameter table
(is only displayed with timer option)
Pa-
rame-
ters
Factory
setting
Setting range
Description
Customer
settings
P01
0
0=Off
1
−
99 hours
Time setting for the duration of utilisation of frying
oil or frying grease. To assure an immediate ef-
fectiveness of the changed setting, the short time
clock has to be reset, refer to page 42 in
P02
1
0=off, 1=on
Switch the acoustic signal or button sound on or
off
P03
10 seconds
0
−
60 seconds
Switch the acoustic signal (0) off and set the dura-
tion of the acoustic signal (1 to 60 seconds)
P04
0
0=off, 1=on
Switch the standby function on or off
P05
30 minutes
10
−
120 min.
Start the standby function after X seconds
P06
90
°
C
60
−
170
°
C
Standby temperature in the bowl
P07
0
0=1
°
C, 1=5
°
C
Temperature change in steps per press of the but-
ton
P08
1
0=off, 1=on
Switching the cooking time correction on or off
