Salvis CucinaEVO 1011QT Operation Instructions Manual Download | Manualshive

Page: 16 / 92

background image

Operating Instructions

5.2

Inserting/removing removable racks/rack trolleys (option)

WARNING!

Risk of injury!

Rack trolleys/

transport carts as well as appliances on wheels may
tip over when transported across slanted surfaces or
thresholds!

Caution hot!

Wear protective gloves to move re

move removable racks/rack trolleys!

.

Close Gastronorm containers with their lids be
fore transportation, to prevent hot liquids from
spilling over.

.

Close the locking mechanism after inserting the
containers into the rack trolley or removable rack.

.

Do not bang against the appliance or door seal
when inserting a rack trolley or removable rack
into the cooking chamber.

.

Activate the parking brake while the transport
cart/rack trolley is not being moved to prevent it
from inadvertently rolling away.

Using a removable rack

.

Remove racks from cooking chamber.

.

Place the slide-in frame in the cooking chamber.
Ensure exact fixing with the guide pin!

.

Secure the removable rack on the transport cart
against movement by using the engagement
lever.

.

Adjust the appliance with the screw-in feet if the
height of the transport cart and slide-in frame are
not aligned.

.

Move the transport cart up to the appliance until
the locking mechanism on the cooking chamber
engages and the transport cart is thus secured
against rolling away.

.

Lift the engagement lever and slide the remov
able rack into the cooking chamber.

.

Secure the removable rack to the slide-in frame
with the engagement lever.

.

Use the pull loop to remove the plate rack.

Using a rack trolley

.

Immediately detach the handle after inserting the
rack trolley (risk of glass breakage or damage to
the cooking chamber door)!

.

Actuate the parking brakes on the rack trolley
after sliding it into the cooking chamber and clos
ing the cooking chamber door to prevent it from
moving unchecked after opening the cooking
chamber door.

.

Always use the detachable handle to pull the rack
trolley out (risk of burns from hot surfaces)!

Press the release rod to unlock the
locking mechanism.

Slide-in rack

Plate rack

Removable rack

Engagement lever

Engagement lever
must be engaged
during transporta
tion

Locking mecha
nism

Transport

cart

Guide pin in
cooking
chamber

Holes for engage

ment lever

Container locking mechanism

Pull loop

Parking brake

Container locking me

chanism

To open: lift and swing

to the left.

Rack trolley, e.g. for
type 2011, 2021

Handle for rack trolley

«
...
14
15
16
17
18
...
»

Summary of Contents for CucinaEVO 1011QT





























































































Reviews:

No comments

Related manuals for CucinaEVO 1011QT

Brand: Oliver Pages: 14

Brand: Fac Pages: 70

Brand: Tescoma Pages: 2

GROEN HYPERSTEAM HY-6E

Brand: Unified Brands Pages: 29

Brand: Vulcan-Hart Pages: 27

Brand: Bron Pages: 4

Brand: Smeg Pages: 4

Brand: Kneader Pages: 20

Brand: Moulinex Pages: 32

Sonifer SW 4300

Brand: Orbegozo Pages: 30

Brand: RoboLabs Pages: 16

Brand: RoboLabs Pages: 26

Brand: Weston Pages: 19

Brand: Jupiter Pages: 36

Brand: Modena Pages: 24

Brand: Doyon Pages: 67

Brand: sympa Pages: 28

Brand: Insignia Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands