•
Installation.
.
•
The fixing hollows should have62.0 cm between each other. At the same time
they should be situated at least 2 meters from the floor. In this case, the wall
heater will be at 1.85 meter from the floor level. Please, refer to the figure 2. The
power connection should be built in at a height unreachable for children.
•
The depth of fixing hollows should be 42-45 mm, diameter 8 mm.
•
If the power cord is too long, you may coil it inside the heater body.
•
Once the heater is hanged, you should tighten the screws.
.
Hang up
wall
Floor
62 cm
At least
1,85 m
At least
2 m
2 fixing hollows, d = 8 mm.
JNF-88H3
（
Lt
）
Fig. 2
