08
TRV10RFM Instruction Manual
Preparing to Pair the Unit
1
Press and hold the button on the
CO10RF coordinator for five seconds.
This puts the coordinator in pairing
mode. See your CO10RF Coordinator
manual for more information.
2
Ensure the wireless thermostat is powered up and ready for
pairing. See your thermostat manual for more information.
3
If you are using the optional RX10RF wireless boiler receiver
configured for remote boiler switching, ensure this has been
powered up and the red LED has gone from flashing to steady. See
your boiler receiver manual for more information.
