Current day of the program
Current time
Temperature unit
AM/PM
Frost Mode ON
Holiday Mode ON
Temporary/Permanent
Override
Heating Mode ON
Low battery
Boost Mode ON
Current temperature
Current program
Pair the RT510RF and RXRT510
Please make sure that the thermostat and the receiver are paired. In order to do this you can use the Pairing
or the testing procedure. The Testing procedure will allow you to check if the devices are communicating
between them. The Pairing procedure will allow you to set up a communication between them.
Pairing procedure
Note:
Turn the receiver off and on again (ON-OFF-ON). The red LED will start flashing.
08 RT510RF Installation Manual
