Salus Gothenburg II, Owner'S Manual

Page: 27 / 48

27
M4*40
12 Stainless Steel Screws
B. Two people will need to lift the rear panel up and into the groove on the staves.
Make sure the rear wall is positioned at where the rear of the barrel sauna will
be and align the slots to accept the rear panel placement. One person will need
to hold the rear panel in place to prevent it from falling. Use the leveler to
position the rear panel vertically and horizontally straight. See figure 5c.
Adjust rear panel to be level. Rear panel must fit into
figure 5c
6. Place Front Panel
A. First, locate the three pieces that make up the front wall panel. Use the
provided screws to attach the three front wall pieces together. Make sure that
three sections are flush at the top and bottom. See figure 6a.
figure 6a
B. Two people will need to lift the front panel up and into the groove on the staves.
Make sure the front wall is positioned at where the front of the barrel sauna will
be and align the slots to accept the front panel placement. Make sure that the
front panel is in the correct position and right side up. You will find the
horizontal wood beams on the interior side of the front wall. One person will
need to hold the front panel in place to prevent it from falling. Use the leveler to
position the front panel vertically and horizontally straight. See figure 6b.