Setting different programs for each 24h
Note: Don’t forget to move the jumpers to 24h in order to have the individual program active. After
that please follow the same instructions as for the 5-2 days program.
MODE
+Hr
SELECT
SET
<
<
MODE
+Hr
SELECT
SET
<
<
Monday will flash. Press Select
to confirm.
Press Up or Down to set
start time for prog 1. Press
Select to confirm.
MODE
+Hr
SELECT
SET
<
<
Press Set to start
programming.
MODE
+Hr
SELECT
SET
<
<
Press Up or Down to set
the minutes. Press Select
to confirm.
MODE
+Hr
SELECT
SET
<
<
Press Up or Down to set
end time for prog 1. Press
Select to confirm.
MODE
+Hr
SELECT
SET
<
<
Press Up or Down to set the
minutes. Press Select
to confirm.
MODE
+Hr
SELECT
SET
<
<
Press Up or Down to
set start time for prog 2.
Press Select to confirm.
Once you have finished setting the start/end time for the first program,
the device will jump into the second program, and then into third and
afterwards into next day. Please follow the same steps for each of the
3 programs. Press
SET
at any time to confirm the setting and return for
program set selection.
2
EP110 Installation Manual 13
