INSTALLATION
Box Contents
1 x Installer / User manual
1 x AE10RF
1 x Plug Adapter
Press and hold the button on
the Coordinator for five seconds
to enter pairing mode. The LED
flashes red.
Plug
Repeater
Plug the repeater
into the adaptor.
SYSTEM OVERVIEW
Press and release the repeater
button. The LED goes solid red
to show it is connected to the
network.
AKL08RF
AX10RF
AS20RF
Thermostat
AC10RF
INTRODUCTION
If your Wyse.ly system has more than 32 battery-powered devices, alongside
the AC10RF ZigBee coordinator you must add an AE10RF ZigBee repeater.
You must also add an AE10RF repeater if the battery-powered devices in your
iT600 Wyse.ly are too far away from the mains-powered devices.
Refer to individual device
manuals for more information.
The ZigBee repeater must be used with
the RF range of the products below:
6
4
The system installation is now
complete. Press and hold the
button on the Coordinator for
five seconds to close pairing
mode. The LED goes solid red.
Also refer to the coordinator
and individual device manuals.
7
Plug the repeater into the120V
POwer outlet. The button flashes
red.
5
Plug in the coordinator as
described in the Coordinator
Instruction Manual. All device
pairing is done through the
coordinator.
1
2
Wyse.ly System
For PDF Installation guide go to
www.salusna.com
ARV10RFM
AE10RF
3
