SALUPO EVO 3 MULTI, Instruction And Installation Manual, Page: 20 / 24

ENGLISH
20
6. APPLICATION
7. GENERAL OPERATION OF THE CONTROL PANEL
SEWAGE: Water lifting systems with alternating operating logic that require the use of 3 level floats
(MINIMUM / MAXIMUM 1 / MAXIMUM 2).
BOOSTER: Pressurization systems with alternating operating logic that require the use of 2 pressure
switches (START / EMERGENCY) and 1 minimum float.
To select the application it is necessary to use the special DIP-SWITCH present in the MULTI 2 relay
located inside the control panel.
L’ EVO 3 MULTI is a control panel with electromechanical equipment. It can be used for 2 types of
application: BOOSTER and SEWAGE .
pened and the motor will no longer be fed.
In this condition the control panel starts the motor taking into consideration the operating logic of the
MULTI 2 relay.
The correct operation (motor running) is indicated by the green light.
It is possible to operate the EVO 3 MULTI in two ways for each motor:
- Manuale
To restore the proper operation, press the reset button in the thermal of the motor.
In this condition the control panel starts the motor excluding the control on the pressure switches or
float switches
.
The malfunction (motor overload) is indicated by the red light. In this condition, the contactor is o-
- Automatica